Includes 1 year limited warranty on parts and accessories Two pole, 3450 RPM capacitor start induction motor for maximum air delivery 150 PSI tank pressure for longer run time, 90 dBA, 120V / 60 hertz/ 1 phase Oil-free pump design for durability and maintenance 3.5 HP (peak) 1.6 HP (running) 4.5 gallon single tank aircompressor
86 pounds; 2-year limited warranty Includes compressor, mobility kit, ASME safety valve, manual Cast-iron construction 12 amps; 150 psi, enough to operate 2 nailers at once; roll bar to protect motor and pump 2-1/2-horsepower 4-1/2-gallon oiled wheeled single hot dog compressor
found in C3551's description: Just for safety's sake, there's a great roll bar protecting the pump and motor. If you're a contractor looking for the right compressor, you've found it.--Kris Jensen-Van Heste
From the Manufacturer
Why lift when you can roll? The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. The High-flo air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility. This compressor is designed with a removable console for maximum mobility and air pressure. The pump and motor are protected by a full roll cage.5 HP single tank aircompressor
Oil-lube aircompressor for maximum durability
150-PSI tank pressure for longer tool run time,
Quieter motor is easy on eardrums
120 V/ 60 hertz/1 phase motor
Two pole, 3450-RPM capacitor start induction motor for maximum air delivery
Includes 1-year limited warranty on parts and accessories
SPECIFICATIONS
150-PSI tank
3450-RPM capacitor start induction motor
8 oz. oil capacity
Product Description
The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. The High-flow air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility.5 gallon, mobile, contractor-style, single tank aircompressor. Patented oil lubrication system allows pump to be operated on an uneven surface and assures long life. 2-port removable console to allow remote air regulation and higher pressure closer to the job site. Full roll cage frame for pump and motor protection.5 gallon storage capacity air tank supports heavy use of brad nailers, staplers, and finish nailers; moderate use of roofing and framing nailers.5 gallon 150 PSI portable aircompressor, Mobility kit, ASME safety valve, and Operator manual.
found in C3551's reviews: Everything it promises and more.......... - All I can say is there are a LOT of portable aircompressors out there and a lot of them are junk. I did not use the oil that came with compressor though, I decided to run a fully synthetic oil (make sure it is a compressor oil) Ingersoll Rand makes a very high quailty oil for this compressor. Everything is where it should be on this compressor: knobs, gauges,ect. The only thing I would tell someone interested in this compressor is don't be fooled by Porter Cables "oil-free" version of this compressor, I have done a lot of comparision shopping not only is the oil free version much noiser but you will be servicing it much more often than the oil-lube pump. Lowe's sells the "oil-free" version of this compressor for 299.00!!!!!!!! You can purchase this compressor, tax free and shipped free and it will be shipped right to your front door! What a deal! Good job Amazon!.
110 pounds; 1-year warranty Includes compressor, ASME safety valve, air regulator, gauges, 1/4-inch coupler, manual Cast-iron construction Max 135 psi; 8 cfm at 40 psi, 5.7 cfm at 90 psi; 90 dB 15 amp, 4-1/2-horsepower, 15-gallon oil-free wheeled single hot dog compressor with handle
found in CPF4515's description:From the Manufacturer
A real performer, this 15-gallon aircompressor allows more usable air to be stored in the tank. The high-pressure design allows for longer run time between refills - it's like being able to fit 19 gallons of air in a 15-gallon tank - so you'll get more done. The powerful induction motor and high-pressure pump deliver 8. A higher flow regulator starts the pump at 110 psi and stops it at 135 psi for more pressure and airflow. This compressor is excellent for home shop use and moderate construction usage. Your purchase includes compressor with high-flow, high-pressure regulator and gauge, 1/4-inch quick coupler, and operator's manual.8 HP Running
135 PSI - 19 gallon equivalent tank size as compared to conventional 125 PSI model
90 Dba
120 Volt capacitor start induction motor
High-FloSM air regulator and High-FloSM quick connect coupler for more work at higher pressure (110 PSI start and 135 PSI stop pressure switch)
Cushioned handle for comfortable grip
Large air regulated pressure gauge for easy visibility
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 135
SCFM Air Delivery @40 PSI: 8.0
SCFM Air Delivery @90 PSI: 5.5 HP, 15 Gallon, Oil-Free Horizontal AirCompressor, 135 PSI Maximum Tank Pressure, 8 SCFM @ 40 PSI & 7 SCFM @ 90 PSI, 90 DBA, 15 AMP Capacitor Start Induction Motor, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes Cushioned Handle & Wheel Kit, ASME Safety Value, l Year Warranty.
All required fittings & thread sealant tape 3/8" x 25' heavy duty airline with MPT fittings CAP1516 - Trim Air 1.5 Peak HP oil-free contractor compressor SB-2in1 combination brad nailer/finish stapler SB-1664FN 16-gauge, 2-1/2" finish nailer
found in CPACK270's description:
Features & Benefits:
Drives both brads and finish staples
Adjustable depth control for quick countersinking adjustments
Tool-free adjustable deflector conveniently directs exhaust
Rubber grip for comfort
Aluminum housing
Includes carrying case
CAP1516 - Trim Air 1.5 Peak HP oil-free contractor compressor
Features and Benefits
1.5 peak horsepower ultra-efficient 8 amp induction motor
High-efficiency oil-free pump eliminates maintenance
Compact design for maximum portability and shop storage
Internal 1.1 running
Operating Pressure 0-125 psi
Pump Style Oil-Free
Tank Capacity 1.
5-year limited warranty Provides 5.6 scfm at 40 psi and 5.1 scfm at 90 psi High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 145 and 175 psi for more usable air High-pressure technology provides the equivalent of a 60-gallon air supply
found in CPFC2TV3525VP's description:From the Manufacturer
This 25-gallon vertical aircompressor is a real performer with a high-pressure design that allows more usable air to be stored in the tank. It's like being able to fit 60-gallons of air in a 25-gallon tank, giving you a longer time between refills, you'll get more done. The powerful induction motor and high-pressure pump deliver 5. A higher flow regulator starts the pump at 145 psi and stops it at 175 psi for more pressure and airflow. Includes compressor with high-flow, high-pressure regulator and gauge, 1/4-inch quick coupler, and operator's manual.6 HP Running
175 PSI - 60 gallon equivalent tank size as compared to conventional 125 PSI model
82 Dba
High-FloSM air regulator (145 PSI start and 175 PSI stop pressure switch) and High-FloSM quick connect coupler
Provides the highest level of moderate-to-heavy duty, tool operation in its class
Direct-drive, twin cylinder, oil free design for duability and no maintenance
120 Volt high-torque, capacitor start induction motor for reliable starting
Longer life and quieter operation with "4 Pole" 1725 RPM motor
Large air regulated pressure gauge for easy visibility and better accuracy
Cushioned handle for comfortable grip
Shroud with integrated air intake filter improves cooling and reduces noise
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Tank Size Gal. PSI: 175
SCFM Air Delivery @40 PSI: 5.6
SCFM Air Delivery @90 PSI: 5.
Product Description
25-gallon tank, 15 amps @ 115 volts, 175 PSI, SCFM Air Delivery 5.1 @ 90 PSI, Pressure release, Regulator, 2 gauges, Standard equipment: Compressor, ASME safety valve, air regulator and gauges.
found in CPFC2TV3525VP's reviews: Not too big or too small - Finally settled on this one, as it seemed to offer good capacity at a good price and a good warranty (5 years on pump). Can run my air ratchet or 1/2' impact quite a long time without turning on. A sander (especially a high-speed unit) uses an awful lot of air and under heavy sander use I think this unit would be "strained". Bottom line if you need a compressor but the smaller 15 to 20 gal types are not enough and a big 60 to 80 gal.
Comes with 10-foot power cord that plugs into 12-volt car cigarette lighter Comes with 1 sports needle and 2 nozzle adapters
Inflates average tires in 5-7 minutes
Built-in work/emergency light
275 PSI high pressure aircompressor
found in 2014's description: We doubt you'll be able to find a more versatile compressor for the price. --Kris Jensen-Van Heste
Product Description
The Wagan 3-in-1 AirCompressor is perfect for vehicles, bike tires, balls, air mattress, and more. The special features include a high pressure compressor that generates 275 PSI, high air flow inflator for quick inflation, built-in light, and pressure gauge.
Product Description
Handy portable airpump runs from the car cigarette lighter. Be prepared for the unexpected with 12V tire air inflators. AirPump Inflates: Bike Tires, Car Tires (SUV, Truck), Athletic Balls, Air Mattresses, Rafts, Inflatable Furniture, Air Tools. Air Pressure (max)of Tire Inflator: 275PSI Special Features of this 12 Volt Auto Air Inflator: High Pressure 275 PSI High Air Flow Inflator Built-in Work light/Emergency light Inflates average sized tires (16') in 5-10 minutes Pressure Gauge Reader Continuous Usage Time: Tire Inflator Has A Heavy Duty Motor. Accessories: 3 Nozzle adapters: collar, tire inflator nozzle, sports needle 12V Power Cord: 10 ft cord High Pressure Air Hose: 14' Air Hose with quick release valve connector Power Source of Tire Inflators: 12V cigarette lighter accessory receptacle Low Power Consumption.
23 by 23 by 13-1/2 inches; 68-1/2 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4-1/2 cfm delivered at 100 psi; dual soft start valve for cold-weather starts; oil-lubricated pump 15 amp 2-3/4-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in D55155's description: com Review
At just a foot high and less than two feet wide out of the carton, this compressor was quite a bit smaller than we expected, so to be fair, we quickly lowered our expectations. The joke was on us, though, because this little powerhouse just doesnt quit, and we learned that you cant judge a compressor by its size. Emglos half-century in the compressor business is evident in this model, and with a couple of small exceptions (well get into that in a minute), we dont think anyone could make a finer piece of air power. Now, this may be a plus or a minus in your book, but we liked the fact that the compressor is factory set to power on at 100 psi an+d shut off at 120 psi, and the cycle time was under 15 seconds.) It has air aplenty for two nailers at once, and with that fast recovery, the job will get done in no time.
In balance, this is one of the best compressors weve seen for the size, power, ruggedness and incredible portability it offers. Heres to a great pairing of two great toolmakers.--Kris Jensen-Van Heste
Product Description
DeWalt's 2-horsepower, 4-gallon compressor features an oil-lubricated design with a cast-iron cylinder to guarantee job site durability. The new roll-cage design and integrated control panel protects the compressor and the controls from accidental damage. Carrying the compressor is easy, too: the flat design lets the user tote the compressor comfortably like a suitcase. The package comes with the initial fill of DeWalt synthetic aircompressor oil.
From the Manufacturer
This 4-gallon hand-carry compressor was designed to meet the tough demands of the job site. The handle is situated to allow the user to carry the compressor with one hand in a natural walking position. The roll cage and integrated instrument panel protect the compressor and instruments from damage. Comes with the initial fill of DeWalt's synthetic aircompressor oil.5 cubic feet per minute delivered at 100 psi, recovers in less than 15 seconds
New ergonomic design for easy portability
Protected components for maximum durability
Oil-lubricated pump allows for increased life
ASME-coded, 4-gallon, OSHA-recognized tank
Dual soft-start valves assist in cold weather startup
Ball valve drain allows for quick and thorough tank draining
Cast-iron cylinder enhances pump life
CSA approved
Specifications
Drive: direct drive
Horsepower: 2-3/4 max hp
Tank size: 4 single ASME tank gallons
Power supply: 120-volt AC, 15 amps, 60 Hz, 2-pole induction motor
Cubic feet per minute at 100 psi: 4.5 cfm
Pump speed: 3,400 rpm
Tool length: 21.
Includes
DeWalt synthetic compressor oil
2 universal quick couplers
Regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
2 HP, 4 Gallon, Electric Single Tank Hand Carry Compressor, 4.5 CFM @ 100 PSI, Ball Tank Drain Valve Allows For Quick & Thorough Draining, Oil Lubricated Pump Allows For Increased Life, Cast Iron Cylinder Increases Life Of The Pump, Dual Soft Start Valves Assists In Cold Weather Start Up, Improved Ergonomics Assists In Carrying, Protected Components For Increased Durability, ASME Coded 4 Gallon Tank Is OSHA Recognized, CSA/NRTL Approved, Tool Length: 21.
found in D55155's reviews: DeWalt takes a classic to a new level - Last yearI spent many months researching a replacement for my ailing Campbell-Hausfeld oilless compressor. Originally I figured the CH had a higher air output, needed no oil changes,would work on slopes and start in cold weather.After forking over the big bucks and putting it to work for DeWalt's 30 Day trial period I couldn't believe I'd gone so long without this compressor. 1) First of all the Emglo name on the unit reassured me that I was getting a tool built by the industry leader with a great reputation for tough, dependable compressors. The first day on the job proved it with quick cycling times and ample air at all times. I do a lot of work in luxury high rises and I've often left the compressor at home rather than drag it down endless corridors. I've paid for the compressor already in labor savings by bringing it to every trim job. I've had othe craftsmen come over and ogle the compressor and ask questions about it, but mostly admiring it.
In short, this is a serious tool for the professional contractor with loads of power(delivered air), durability, great design and looks. My only complaint is the air release lever, an otherwise solid unit mounted on the underside of the tank. The opening is too narrow for your hand and the sharp stream of air can actually cut your skin. In addition the compressor shoots out small chunks of ICE from the tank creating dangerous projectiles that will cut your hand or riccochet into your eye. Finally, I have a compressor that won't roll around in the back of the truck knocking off gauges and connections as I drive through the city. Good machine, but some packaging and assembly issues - To my dissatisfaction, it arrived with a broken air filter and some loose items rolling around in the air tank. No, it wasn't the air filter parts, it was something metalic actually inside the closed tank! Amazon referred me to DeWalt who referred me to my local service center.
Thanks to Amazon's incredibly fast and hassle-free process for returns, I had my replacement compressor less than a week later. Unfortunately, it too had a broken air filter. But since everything else was fine, I bought a filter locally (DeWalt's replacement has yet to arrive) for $10 and kept the compressor. This was not in the first shipment and is REQUIRED before starting the unit which is something that as a first-time compressor buyer, I would not have known to do. That kind of transition can lead to inconsistencies in fabrication and packaging like I have experienced, but I'm hopeful that the core design and construction of the pump and tank is solid and I like the way the machine works so I'm keeping it.
60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset 14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in EC12's description: com
Hitachis 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, its the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too.--Kris Jensen-Van Heste
From the Manufacturer
This Hitachi aircompressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm.1 cfm of free air, at 90 psi.
From the Manufacturer
The Hitachi EC12 aircompressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It delivers 4 cubic feet per minute of free air at 90 psi.2 cubic feet per minute of free air
Specifications
Horsepower: 2
Amps: 15
Speed: 3,450 rpm
Air displacement: 8. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
found in EC12's reviews: Excellent Compressor - The compressor is quiet, powerful, and reliable so far. I have looked at quite a few compressors and 95% of them have something hanging out waiting to be sheared off if impacted. I think it would be fairly simple for them to tuck the regulator assembly between the tank and pump to avoid possible damage but few manufacturers do so I didn't take any stars away for that. Great price, great compressor. I modified my compressor by bolting a single gang plastic electrical box to the leg under the regulator. The compressor power cord is spliced inside the box to a recepticle and a 25 foot 12ga cord that provides power to the recepticle for accessory power tools or extension cords, etc.
Full Panel Roll Cage Protection With Recessed, Easy To Read Gauge, Includes ASME Safety Valve. Hi-Flo Air Regulator & Dual Quick-Connect Couplers Delivers 7.7 SCFM @ 40 PSI & 5.3 SCFM @ 90 PSI 2 Pole, 3,450 RPM Induction Motor with Run & Start Capacitors For Easy Start Up & Maximum Air Delivery 1.6 HP Running, 4.3 Gallon, Oil-Free Side Twin Stack Compressor, 150 PSI Maximum Tank Pressure
found in C3101's description:From the Manufacturer
This side-stack aircompressor from Porter-Cable introduces a new high-pressure design that provides 71 percent more usable air over traditional 125 psi units. The pressure switch starts the pump at 120 psi and stops it at 150 psi for more pressure and airflow, so you get better performance from your air-powered tools.
Product Description
Porter Cable,4 Gallon, 3 HP, Oil Free, Sidestack AirCompressor, Provides 150 PSI For Longer Tool Run Time, 5.