Delivers 4 avg scfm @ 90 psi Wheels and handle for easy portability Oil-lubricated cast iron cylinder pump for long lasting, reliable performance Large, 8-gallon tank for extra storage
found in HL5501's description: com
An aircompressor isn't one of those must-have tools for the homeowner-that is, until you've used one. The HL5501 has plenty of power for a stapler or nailer; imagine how quickly a chair rail could go up. Because it's a smaller unit, its air delivery is lower, so make sure you check the air requirements of the tools you intend to use it with.--Kris Jensen-Van Heste
From the Manufacturer
Ideal for inflating balls and tires, nailing fences, stapling protective wrap, and more, this 8-gallon aircompressor offers a whole new world of around-the-house convenience. A handle and wheels make this compressor highly portable for doing jobs in the basement, on the roof, and in the yard. You'll get those occasional home repair jobs done more quickly and with less expensive with this Campbell Hausfeld compressor and air tools.
Compared to electric power tools, Campbell Hausfeld air tools save you both time and money. The initial cost of an air tool is significantly lower than its electrically powered counterpart, and the average life is longer. Air tools also deliver more torque and higher revolutions-per-minute than electric tools, helping you complete your jobs more quickly and effectively.
FEATURES
Large, 8-gallon tank for extra storage
Oil-lubricated cast iron cylinder pump for long lasting, reliable performance
Wheels and handle for easy portability
Delivers 4 avg scfm @ 90 psi
SPECIFICATIONS
Delivers 4 avg scfm @ 90 psi
Product Description
8 Gallon, 15A Cast Iron AirCompressor, Oil Lube Pump With 2.
5-year limited warranty Provides 5.6 scfm at 40 psi and 5.1 scfm at 90 psi High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 145 and 175 psi for more usable air High-pressure technology provides the equivalent of a 60-gallon air supply
found in CPFC2TV3525VP's description:From the Manufacturer
This 25-gallon vertical aircompressor is a real performer with a high-pressure design that allows more usable air to be stored in the tank. It's like being able to fit 60-gallons of air in a 25-gallon tank, giving you a longer time between refills, you'll get more done. A higher flow regulator starts the pump at 145 psi and stops it at 175 psi for more pressure and airflow. Includes compressor with high-flow, high-pressure regulator and gauge, 1/4-inch quick coupler, and operator's manual.6 HP Running
175 PSI - 60 gallon equivalent tank size as compared to conventional 125 PSI model
82 Dba
High-FloSM air regulator (145 PSI start and 175 PSI stop pressure switch) and High-FloSM quick connect coupler
Provides the highest level of moderate-to-heavy duty, tool operation in its class
Direct-drive, twin cylinder, oil free design for duability and no maintenance
120 Volt high-torque, capacitor start induction motor for reliable starting
Longer life and quieter operation with "4 Pole" 1725 RPM motor
Large air regulated pressure gauge for easy visibility and better accuracy
Cushioned handle for comfortable grip
Shroud with integrated air intake filter improves cooling and reduces noise
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Tank Size Gal. PSI: 175
SCFM Air Delivery @40 PSI: 5.6
SCFM Air Delivery @90 PSI: 5.
Product Description
25-gallon tank, 15 amps @ 115 volts, 175 PSI, SCFM Air Delivery 5.1 @ 90 PSI, Pressure release, Regulator, 2 gauges, Standard equipment: Compressor, ASME safety valve, air regulator and gauges.
Ball valve drain allows for quick and thorough tank draining Dual voltage feature allows easy switching from 120 to 240 volts Dual control feature allows start/stop or constant run option Twin cylinder, cast iron, oil lubricated pump 8.4 cfm delivered at 100 psi with 17-gallon tank
found in D55585's description:From the Manufacturer
You will never run short of air again with this 2-horsepower electric wheeled compressor supported by an ASME-coded 17-gallon OSHA-recognized tank. The user can quickly and completely drain the compressor by the ball valve drain, which won't clog like other models that use needle valves. The D55585 includes DeWalt's synthetic compressor oil and a 3/8-inch NPT pressure regulator.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
18-1/2 by 15 by 16-3/4 inches; 60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron Delivers 3.2 cfm at 100 psi; features overload protection to eliminate risk of motor damage 14 amp 2-1/2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in D55151's description:From the Manufacturer
This versatile compressor can perform a multitude of jobs, from roofing to finish to trim to home/hobby applications. The compressor delivers 3. Includes 3/8-inch regulator and initial fill of DeWalt synthetic aircompressor oil.
Includes
DeWalt synthetic compressor oil
Pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
Portable electric powered compressor with 2 HP, high output motor.
85 pounds; 1-year warranty Includes compressor, mobility kit, and manual Cast-iron construction 2-port removable console for remote air regulation; full roll cage to protect kit; 150 max psi 15 amp, 3-1/2-horsepower, 4-1/2-gallon oil-free wheeled single hot dog compressor with handle
found in C3151's description: com
Porter-Cables solved the compressor mobility problem on two levels with this tool. First, and most impressively, its got a two-port removable console for remote air regulation and higher air pressure right where youre working. And the compressor itself has wheels and an extension handle, making life easier on you.
Lets face it: This compressors big, heavy and loud, with a max psi of 150. You can run three or four guns at once off it with a splitter and have no air supply problems whatsoever.5 gallon, oil-free contractor style compressor is packed with features. The high-flow air regulator and two-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. Air delivery at 40 PSI: 7.
What's in the Box C3151 Job Boss Compressor, mobility kit, manual.
From the Manufacturer
This 3.5 gallon, oil-free contractor style compressor is packed with features. The High-flo air regulator and 2-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site.
49 pounds; 1-year warranty Includes 2 nailers, stapler, compressor, air hose with coupler and plug, oil, manuals Rugged plastic housings on tools; cast-iron compressor Includes FN250B finish nailer, BN125A brad nailer, NS100A stapler, and 6-gallon pancake compressor Factory-reconditioned nailer, stapler, and compressor combo kit
found in CFFN251TR's description: com Product Review
Ideal for onsite trim work, architectural woodwork, and casework installation, this combo kit from Porter-Cable includes a finish nailer, brad nailer, narrow crown stapler and compressor.
First, the compressor: The unit blasts out an impressive 150 maximum psi for driving more nails than traditional 135 psi compressors. Running on standard household current, this 120-volt electric compressor also cranks out 2.6 standard cubic feet per minute at 90 psi for quick compressor recovery time and faster nailing. Weighing just 34 pounds, the compressor is easy to transport from project to project. And, two quick-connect couplers let the compressor power two nail guns to at the same time. The purchase is covered by a manufacturer 1-year warranty on each component. Olson
Whats in the Box 6-gallon, 150 psi compressor with two couplers; 1-1/4-inch, 18-gauge brad nailer; 2-1/2-inch, 16-gauge finish nailer; 25-foot air hose with coupler and plug; 2,000 fasteners, nailer oil, canvas carry bag.
Low profile design and pneumatic tire for mobility Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Twin cylinder, cast iron, oil lubricated pump for durability and reliability 5.5 HP Honda GX gas engine provides proven reliability and durability
found in D55270's description:From the Manufacturer
The D55270 is powered by a 5. The automatic throttle control allows the unit to idle and conserve fuel when air is not required. The D55270 comes complete with the initial fill of DeWalt synthetic aircompressor oil.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
5.5 HP, 8 Gallon, Compressor Powered By A Honda GX Gas Engine With Proven Reliability & Durability, 8.9 CFM @ 100 PSI, Automatic Idle Control For Reduced Fuel Consumption, Low Oil Shut Off Provides Greater Engine Protection, Twin Cylinder, Cast Iron, Oil Lubricated Pump With Emglo's 50 Years Of Proven Durability & Reliability, Ball Valve Drain Allows For Quick & Thorough Tank Draining, Low Profile Design For Easy Maneuverability, Pneumatic Tire Improves Worksite Maneuverability, Includes: Dewalt Synthetic Compressor Oil & Pressure Regulator.
Three year limited warranty Complete with high-flow regulator and quick-connect, pressure gauge and tank gauge Patent pending oil-lube system with ball bearing design Direct drive, no belts or adjustments are necessary 2.5 HP, 4.3-gallon oil-lube compressor
found in CPLDC2541S's description:From the Manufacturer
Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. Now, take this revolutionary pump engineered to last over 3,000 hours of use and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions.3 HP Running
Patented oil lubrication system allows pump to be operated on an uneven surface
Universal, High-FloSM, push-to-connect coupler in air outlet
150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
83 Dba
Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
Low 12 Amp motor draw prevents accidental tripping of circuit breakers
4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
Heavy duty cast iron cylinder construction and large 8 oz. oil capacity to assure long life
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, oil, and operating manual
86 pounds; 2-year limited warranty Includes compressor, mobility kit, ASME safety valve, manual Cast-iron construction 12 amps; 150 psi, enough to operate 2 nailers at once; roll bar to protect motor and pump 2-1/2-horsepower 4-1/2-gallon oiled wheeled single hot dog compressor
found in C3551's description: If you're a contractor looking for the right compressor, you've found it.--Kris Jensen-Van Heste
From the Manufacturer
Why lift when you can roll? The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. The High-flo air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility. This compressor is designed with a removable console for maximum mobility and air pressure.5 HP single tank aircompressor
Oil-lube aircompressor for maximum durability
150-PSI tank pressure for longer tool run time,
Quieter motor is easy on eardrums
120 V/ 60 hertz/1 phase motor
Two pole, 3450-RPM capacitor start induction motor for maximum air delivery
Includes 1-year limited warranty on parts and accessories
SPECIFICATIONS
150-PSI tank
3450-RPM capacitor start induction motor
8 oz. oil capacity
Product Description
The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. The High-flow air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility.5 gallon, mobile, contractor-style, single tank aircompressor. 2-port removable console to allow remote air regulation and higher pressure closer to the job site.5 gallon storage capacity air tank supports heavy use of brad nailers, staplers, and finish nailers; moderate use of roofing and framing nailers.5 gallon 150 PSI portable aircompressor, Mobility kit, ASME safety valve, and Operator manual.
found in C3551's reviews: Performs to expectations - I believe it will operate a round head nailer and roofing nailer with moderate use as stated by the manufacturer. I specifically wanted an oil lube compressor for durability, and this model fits that requirement. For handyman work or specialty trim nailing, this compressor is ideal.
Three year limited warranty Full roll cage with high flow regulator and dual quick-connects Patent pending oil-lube system with ball bearing design Direct drive, no belts or adjustments are necessary 2.5 HP, 4.3-gallon oil-lube compressor
found in CPLDC2540S's description:From the Manufacturer
Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. Now, take this revolutionary pump engineered for maximum durability and life, and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions. oil capacity to assure long life
Patented oil lubrication system allows pump to be operated on an uneven surface
Protected panel includes two universal High-FloSM push-to-connect couplers and larger, easy to read regulated air pressure gauge
150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
83 Dba
Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
Specially designed protective transport handles
Low 12 Amp motor draw prevents accidental tripping of circuit breakers
4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
Standard Equipment: Compressor, ASME safety valve, air regulator and gauge, 1/4" quick coupler, oil, and operating manual
SPECIFICATIONS
Lubrication: Oil Lube
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 5.4
SCFM Air Delivery @90 PSI: 4.
Air Compressor Conditioning Copeland Manufacturer - 1234567