Air Compressor Duty Electric Motor - 1   2   3   4   5   6   7   8   9   10
13.8 Amp 3 Horsepower 5 Gallon Oiled Wheeled Single Hot Dog Compressor | Makita MAC5200
Makita MAC5200
$544.00 >> $319.00
by Makita

29 by 19 by 19-1/2 inches; 88 pounds; 1-year warranty
1/4-inch brass Makita universal coupler
Cast-iron pump and roll cage construction
6-1/2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise
13.8 amp, 3-horsepower, 5-gallon oiled wheeled single hot dog compressor and folding handle

found in MAC5200's description: com Product Review
Whether you need a compressor for woodworking, painting, caulking or construction, this 5-gallon Makita is a great choice, primarily because of its impressive 6-1/2 cfm at 90 psi on a 13. Built-in Storage Compartment - Conveniently stores air fittings & accessories. Air Hose Wrap - Stores 50 of 3/8" Air Hose with handle folded or upright. Large automotive style industrial air filter for increased air intake and greater efficiency.
found in MAC5200's reviews:
Good specs for the price range - 8 amp draw, collapsible cart, oil lubed pump, good air filter and ball valve drain. Did not find many other compressors in this price range with those specs and did not want to pay $600+ for a monster. The manual says it has a 50% duty cycle so if you need a compressor that will run without stopping look elsewhere.

On arrival the box had major rips and crushed areas fairly typical of my experiences of UPS shipment with heavy items.

POOR PERFORMER PERIOD! - I have been a carpenter for 15 years and have used alot of different compressors. This compressor is far to heavy and loud for the performance it puts out. The pressure drops too low before the motor kicks in and the wheels are too small for maneuvering jobsites.
Finish Nailer, Brad Nailer, Narrow Crown Stapler and Co | Factory-Reconditioned Porter Cable CFFN251TR
Porter Cable CFFN251TR
$329.00
by Porter Cable

49 pounds; 1-year warranty
Includes 2 nailers, stapler, compressor, air hose with coupler and plug, oil, manuals
Rugged plastic housings on tools; cast-iron compressor
Includes FN250B finish nailer, BN125A brad nailer, NS100A stapler, and 6-gallon pancake compressor
Factory-reconditioned nailer, stapler, and compressor combo kit

found in CFFN251TR's description: com Product Review
Ideal for onsite trim work, architectural woodwork, and casework installation, this combo kit from Porter-Cable includes a finish nailer, brad nailer, narrow crown stapler and compressor.

First, the compressor: The unit blasts out an impressive 150 maximum psi for driving more nails than traditional 135 psi compressors. Running on standard household current, this 120-volt electric compressor also cranks out 2.6 standard cubic feet per minute at 90 psi for quick compressor recovery time and faster nailing. Weighing just 34 pounds, the compressor is easy to transport from project to project. And, two quick-connect couplers let the compressor power two nail guns to at the same time. Olson

What’s in the Box
6-gallon, 150 psi compressor with two couplers; 1-1/4-inch, 18-gauge brad nailer; 2-1/2-inch, 16-gauge finish nailer; 25-foot air hose with coupler and plug; 2,000 fasteners, nailer oil, canvas carry bag.

5-1/2 Horsepower 8 Gallon Wheeled Oiled Twin Pontoon Gas Compressor | DeWalt D55270
DeWalt D55270
$1,609.74
by DeWalt

Low profile design and pneumatic tire for mobility
Automatic idle control for reduced fuel consumption
Ball drain valve allows for quick and thorough tank draining
Twin cylinder, cast iron, oil lubricated pump for durability and reliability
5.5 HP Honda GX gas engine provides proven reliability and durability

found in D55270's description: The automatic throttle control allows the unit to idle and conserve fuel when air is not required. Other features include a braided steel after-cooler, heavy-duty belt guard, ball-type tank drain valves, and a 3/8-inch regulator with gauges. The D55270 comes complete with the initial fill of DeWalt synthetic air compressor oil.

Includes

  • DeWalt synthetic compressor oil
  • 3/8-inch NPT pressure regulator

Warranty
This DeWalt high-performance industrial tool comes with a warranty package that includes:
30-day, no-risk satisfaction guarantee
One-year free service contract
One-year warranty

Product Description
5.5 HP, 8 Gallon, Compressor Powered By A Honda GX Gas Engine With Proven Reliability & Durability, 8.9 CFM @ 100 PSI, Automatic Idle Control For Reduced Fuel Consumption, Low Oil Shut Off Provides Greater Engine Protection, Twin Cylinder, Cast Iron, Oil Lubricated Pump With Emglo's 50 Years Of Proven Durability & Reliability, Ball Valve Drain Allows For Quick & Thorough Tank Draining, Low Profile Design For Easy Maneuverability, Pneumatic Tire Improves Worksite Maneuverability, Includes: Dewalt Synthetic Compressor Oil & Pressure Regulator.

15 Amp 6.5 Horsepower 60 Gallon Oiled Vertical Compressor | Campbell Hausfeld VT6275
Campbell Hausfeld VT6275
$576.15 >> $599.20
by Campbell Hausfeld

60 gallon vertical tank is a space saving design with easy access to tank tray
6.5 HP Peak motor provides significant power for tough jobs
Unique product design from the largest manufacturer of reliable and durable, single stage CAST IRON pumps in the USA
Oil-Lubricated pump has a traditional design that is quieter and longer lasting than oilless pumps
Solid Cast Iron twin cylinder pump provides up to 5,000 hours of extended life. Over 35% quieter and 60 degrees cooler than aluminum pumps with cast iron cylinder sleeves.

found in VT6275's description: From the Manufacturer
The VT6275, 60 gallon oil-lubricated air compressor has a solid cast iron twin cylinder pump that provides up to 5,000 hours of extended life.

Product Description
mfr: Campbell Hausfeld Air Products Campbell Hausfeld is a recognized leader in the home improvement and automotive industry.

SINGLE STAGE AIR COMPRESSOR. Single Stage Cast Iron Compressor7 HP Peak, 60 Gallon Vertical, 240 Volt.
18 Gauge Brad Nailer Compressor Combo Kit | Porter-Cable CFBN200A
Porter-Cable CFBN200A
$423.00 >> $175.00
by Porter-Cable

1 year limited warranty
Complete kit with quick-connects, 25' 150 psi air hose, thread sealing tape, nailer case, and wrenches
Oil-free compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi
Nailer features cushion grip, depth of drive, quick-release nosepiece, and directional exhaust
Professional nailer shoots 3/4" to 2" 18 gauge brad nails

found in CFBN200A's description: Here they've packaged their hard-working 18-gauge brad nailer with its power source--a 15 amp, 120-volt, 6-gallon compressor driven by a 2-horsepower oil-free motor. Fill up the nailer with standard 18-gauge brads from 3/4 inch to 2 inches long, hook up, and you're ready to install baseboards, chair rails, moldings, even make quick work of those wooden craft items like country shelves and vegetable bins. The kit comes with quick connects, 25 feet of 150 psi air hose and thread sealing tape.
found in CFBN200A's reviews:
Great Deal on a Heavy duty compressor and nail gun -
Great DIY kit! - Both the compressor and nailer have worked flawlessly. The compressor is lightweight, easily portable, and has plenty of capacity for my nailers to keep the duty cycle pretty low (read: it doesn't turn on very often when in use). My only complaint about the kit is that the compressor is a bit loud.
15 Amp 2 Horsepower 20 Gallon Oiled Wheeled Single Tank Compressor | Campbell Hausfeld VT6290
Campbell Hausfeld VT6290
$457.71 >> $409.99
by Campbell Hausfeld

Fully enclosed protective belt guard with "Directed" cooling fan.
5 HP Peak motor provides significant air flow. Operates on 120/240 volt service. Pre-wired for 120V.
Unique product design from the largest manufacturer of reliable and durable, single stage CAST IRON pumps in the USA
20 Gallon ASME code tank for tough jobs.
Rugged Cast Iron two cylinder pump provides up to 5,000 hours of extended life. Oil-Lubricated pump has a traditional design that is quieter and longer lasting.

found in VT6290's description: From the Manufacturer
The VT6290, 2 Running HP, wired for household current delivers enough air power to tackle tough jobs. The twin cylinder, oil lubricated, cast iron single stage pump runs quieter - so the compressor can be used in the same area that the work is taking place. Solid cast iron units are up to 35% quieter than aluminum units with cast iron cylinder sleeves, and dramatically quieter than direct drive aluminum compressors. These compressors are made in the US with a 3 year warranty.

Product Description
mfr: Campbell Hausfeld Air Products Campbell Hausfeld is a recognized leader in the home improvement and automotive industry.

SINGLE STAGE AIR COMPRESSOR. Single Stage Cast Iron Compressor5 HP Peak, 20 Gallon.
found in VT6290's reviews:
VT6290 and FedEx - The box was busted on one side causing some of the content to spill outside (a tire and air filter). On top of that, FedEx delivered the box upside down, causing the discharge tube to bend, the air filter to separate from the pump, a busted pressure gauge and a bent handle bar.
The compressor DOES NOT include oil. The air filter supplied causes the compressor to be kind of noisy. A motor start-up capacitor rattles inside a round enclosure attached to the motor itself.

Except for the awful FedEx delivery, I am happy with the compressor. Free delivery, free air hose, no tax, and 10% off.

Might work if received undamaged.......and with oil...and a few fixes - The shipping box is flimsy and cannot adequately support nor protect the compressor and parts. Mine arrived with a broken regulator, pressure gauge and air-filter assembly all of which apparently snapped off during shipment with no visible exterior box damage.

As the other reviewer also mentioned the compressor does NOT come with oil so be sure to have SAE30 air-compressor oil ready when it arrives. Also, you will need to provide your choice of air outlet connector.

If it wasn't for the bad shipment packaging I'd say initially that the compressor is a good buy but if Campbell Hausfeld has so little regard to protecting their product in shipment to you I question the integrity of the machine itself.

UPDATE 7/15: I am updating this review a full day after receiving and can add more to the trials and tribulations of purchasing a C-H compressor. The air filter assembly is currently taped but working until I can get a replacment. All in all if you include travel time to Home Depot nearly 2-1/2 hours were spent just getting the compressor to work only to discover that there is a leak at weld where the pump mount attaches to the tank.

On the plus side is the quietness and the nicely powered 120/240v motor.) if using an extension cable as this compressor does draw a load when starting.

IMHO I wouldn't order a product like this if you need it for an immediate job as it will take to either repair yourself or to return and await a replacement. I needed this compressor to replace my dead one and ordered it to coincide with my time at home as I could not expect my wife to unload it.

7.5 Amp draw 1-1/2 Horsepower 6 Gallon Oil-Free Pancake Compressor with 13 Pie | Porter-Cable C2001-WK
Porter-Cable C2001-WK
$180.55
by Porter-Cable

81-1/2 by 19-1/4- 13-1/4 inches; 34 pounds; 6-gallon capacity; 1-year warranty
Includes compressor, includes 25-foot coil hose, blow gun and attachments, tire chuck, tire gauge, quick coupler, plugs and Teflon tape, manual
Cast-iron construction
1.5-horsepower; 3-1/4 sfcm; 150 psi max
1-1/2-horsepower 6-gallon pancake-style compressor with 13-piece accessory kit

found in C2001-WK's description: 5 Hp running pancake-style air compressor has a new high pressure design that provides 71-percent more usable air over traditional 125 psi units. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. The universal motor runs on standard household current. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.)

Product Description
Includes Compressor, High-Flo air regulator and push-to-connect couplers, 13-piece accessory kit (includes 25' coil hose, blow gun and attachments, tire chuck, tire gauge, quick coupler, plugs and Teflon tape), Operating manual.
/ FP18KIT 18-Gauge Brad Nailer Compressor Combo Kit | Senco PC0947
Senco PC0947
$249.00 >> $197.00
by Senco

1-year warranty on nailer; 90-day warranty on compressor
Includes nailer, 1/4-inch -by-25-foot hose, safety glasses, fittings, oil, 1,200 brad nails, wrenches, and manuals
Compressor: 1 horsepower, 2-1/2 gallons; aluminum cylinder with steel sleeve; 20 pounds
Nailer: adjustable depth of drive, rear exhaust, easy-open latch, no-mar pad, low-load indicator
18-gauge brad nailer and 1-gallon compressor combo kit

found in PC0947's description:

FinishPro 18 FEATURES

  • Extra power — Drives fasteners up to 2" in hard wood applications
  • Belt hook — For convenience
  • Adjustable depth-of-drive
  • Rear exhaust — Keeps oil and dust away from work surface
  • Easy-open latch — For quick and comfortable loading
  • Hardened steel driver — For extended life
  • Full soft grip — For comfort and control
  • Low load indicator — Visible fastener indication
  • No-mar pad — To protect work materials
  • One-year warranty
  • Includes case, fitting, oil, hex wrench and fastener rebate

Projects
Baseboard,cabinets, casebacks, chair rail, finish and trim, furniture frames, furniture trim, mirror and picture frames, trim

FinishPro 18 SPECIFICATIONS

  • Power (in/lbs): 168
  • Height: 9.3 bar)
  • Mode of Operation: Restrictive Trigger

Fastener Types

  • Gauge: 18
  • Fastener Range: 5/8"—2"
  • Finish: Galvanized

What's in the Box
This kit comes complete with the FinishPro 18 brad nailer, a Senco 1/2 hp (1 hp peak), 1-gallon compressor, 1/4-by-25-foot coil hose, safety glasses, fittings, tool oil, variety pack of 1,200 brad nails, tool wrenches and manuals.

Product Description
Finish Pro 18 Combo Kit, Perfect For Woodworkers & Punch List Contractor, Kit Includes, Lightweight Oilless, 1HP Compressor, Finish Pro 18 Brad Nailer 5/8" To 2", Hose, Fittings, Sample Pack Of Brads, Safety Glasses & Bottle Of Oil.
found in PC0947's reviews:
I'm impressed. - I upgraded to this from a cheap little electric brad nailer that could not sink a 1" brad. The compressor is small & quiet and has absolutely no problem keeping up with the nailer. I own an old 5 horse 220 v compressor but wanted something to use inside the house without running hundreds of feet of hose from the garage.
This contractor is very pleased... with the compressor - I own several portable compressors, but hate to lug them around. The little compressor is lightweight and perfect for small jobs like these. On bigger jobs I still use one of my heavy duty compressors. It's just not built for heavy duty work.
Woodworker Hobby or Trim Tool - I got this package for very light duty use - woodworking shop projects and qtr-round molding on flooring. The nailer is a quality tool that sells for $120 everywhere so that makes the compressor only $75. I had a $15 coupon so the compressor was only $60 for me.
The compressor is so light that it is no problem carrying it. I will get an air blower tip for it; so far I'm satisfied.

6 Amp 3/4 Horsepower 2 Gallon Oil-Free Hot Dog Compressor | Thomas Compressors T-635HD
Thomas Compressors T-635HD
$369.00 >> $279.00
by Thomas Compressors

Long life, contractor quality machine - rated for continuous use
Low amp draw - works on 15 amp circuits and with extension cords
Versatile - offers framing, roofing or finish gun capability
3/4 Horsepower - delivers 1.7 cfm at 100 psi.
Lightweight and portable, only 26 pounds

found in T-635HD's description: From the Manufacturer
Thomas Industries T-635HD is a quiet running (69-decibel) 3/4 HP compressor that is both portable and versatile. Other uses include, tire inflating, painting, airbrushing, small air tools, and winterizing water lines and RV's.
found in T-635HD's reviews:
Light weight professional grade compressor for small jobs - I was looking for a portable and not overly loud air compressor, for my low air-volume tools. I had a 4-gallon pancake compressor for several years, but at 70 lbs. Although it hardly qualifies as "quiet", it isn't nearly as noisy as other compressors I've heard. I installed a 16" stainless steel braided faucet plumbing hose on the compressor's air-outlet port; routed the hose out the back under the motor support, and screwed on a quick disconnect coupling. Because the tank is only 2 gallons (to keep weight/bulk down), the pump comes on more often than on larger units, but when it does, it's only on for about 12 seconds (if you're not using air).

Thomas's Perma-Lube pump design results in a 100% duty cycle. Translation: the compressor can be used continuously, without letup. Some compressors have only a 50% duty cycle, which means you shouldn't run it more than 30 minutes for every hour used, as that could cause excessive wear on the pump and/or motor.

You'd want a bigger unit if you had two roofing or stud-nailers going, but for low-air-volume requirements such as trim work, this little Thomas unit is just about perfect.

September 2006 update:

While working on a home renovation project, the compressor's low air pressure switch clicked, but the motor didn't start. By the time I got to the compressor, the motor was smoking, literally. Am wondering if the motor would have burned out had I not gotten to it in time.

13.5 Amp 2 Horsepower 4 Gallon Oil-Free Twin Hot Dog Compressor | Thomas Compressors T-2820ST
Thomas Compressors T-2820ST
$649.00 >> $489.00
by Thomas Compressors

20 by 15.6 by 16.5; 71 pounds; 5-year warranty on electrical components
Includes manual
Durable cast iron
5 cfm at 100 psi; quiet 74 dB; 2-cylinder in-line design
13-1/2 amp, 2-horsepower, 4-gallon, oil-free twin hot dog compressor

found in T-2820ST's description: From the Manufacturer
At (74-decibels) the Thomas T-2820ST is the quietest 2 HP contractor grade compressor on the market. Delivering 5 cfm at 100 psi it is also the highest output 2 HP compressor available. A solid state start switch and 5-Year Electrical Warranty are also Thomas exclusives and not offered anywhere else. Often called "The Cadillac of Portables" it sets the standard on what 2 HP compressors should be.
found in T-2820ST's reviews:
The Cadillac of portable air compressors - My new Thomas compressor, T-2820ST, is quiet enough to run in the house and is so well balanced that it is not too heavy to move around. Oiless, 5cfm @100psi, 100% duty cycle, 9 second come-back with capacitor-aided start(i. extension cords can be used); this is the Cadillac of portable compressors. The paint job on the tanks could be better and air fittings could be included, but those are minor issues.
This is a keeper! - this is a great compressor. I've used it for air guns, various types of light and heavy duty nail guns, and shop tools. Very quiet compared to other compressors of the same size, but compressors will never be mistaken for a 'silent' partner.
Air Compressor Duty Electric Motor - 1   2   3   4   5   6   7   8   9   10

Porter-Cable (27)
Campbell Hausfeld (18)
DeWalt (14)
Emglo (10)
Thomas Compressors (9)
Bostitch (9)
Makita (6)
Hitachi (5)
Porter Cable (4)
Grip Rite (3)
GRIP-RITE (2)
Palmgren (2)
Xantrex Technologies (1)
Black & Decker (1)
Ingersoll Rand (1)
Wagan (1)
Stanley Hand Tools (1)
AccuSet (1)
Q Industries (1)
Senco (1)

Other Searches:

Air Compressor Duty Electric Motor
Electric Air Compressor Motor
Air Compressor Duty Industrial Part Speedaire
Air Compressor Motor
Ge Air Compressor Motor Part
Dayton Air Compressor Motor
Air Compressor Conditioner General Motor Oil
Air Compressor Motor Wiring Diagram
Electric Air Compressor
Electric Air Compressors
©2006