Three year limited warranty Cast-iron cylinder and stainless steel valves for cooler operation
Patent pending oil-lube system with ball bearing design
Direct drive, no belts or adjustments are necessary
2.5 horse power, 4-gallon oil-lubecompressor
found in CPLDC2540P's reviews: Design flaws - First one of these I received came out of the box damaged beyond repair. Switch was broke, regulator fitting broken off flush with the tank, tabs on the compressor that the shroud connects to were broken off from the compressor. After about 2 hours of use (with me that translates to about 3 months) one of the tabs on the compressor that connects to the shroud has broken off. I have not moved the compressor since the day I took it from its box. It's a bit loud but not as loud as some of the "oilfree" compressors are.
Includes 1 year limited warranty on parts and accessories Two pole, 3450 RPM capacitor start induction motor for maximum air delivery 150 PSI tank pressure for longer run time, 83 dBA- quiet operation, 120 V/ 60 hertz/ 1 phase Cast iron oil-lubeaircompressor for maximum durability 2.5 HP (peak)/ 1.3 HP (running) 4.5 gallon, contractor-style, single tank aircompressor
found in C3550's reviews: Great product, check for needed accessories - I am really glad I spent the extra money for the oil-lube model. My one complaint is that the manual is not very helpful for those of us who have not used air tools before. It's like getting a toy without the batteries, if you do not have all the required atachments when the compressor arrives.
Long life, contractor quality, rated for continuous use. Low 10 amp draw - works on cords.
Quiet running - use indoors or out
Lightweight and portable, only 43 lbs
1 HP - 2.5 cfm @ 100 psi
found in T-35HD's description:
PERMA-LUBE™ DESIGN - Oil-Less design for maintenance free operation and quick cold weather starts
HIGH-QUALITY COMPONENTS - By using high-quality fittings, gauges and other components, the Renegade® Pro-Series provides the ultimate integrity of a long, service-free life
Fuel Capacity .66 Gal. Engine Honda GX120 4 HP OHV Gas
Pressure Switch Continuous run unloader valve with idle down - Unloads @135 PSI, Loads @ 115 PSI
Air Delivery 5.4 CFM @ 100 PSI
Air Displacement 12.4 CFM
found in TG-400HST's description:
Longer Life - With the patented LifeGuard™ dirt deflector that keeps job site dust and grit out of the compressor, the new Renegade® will perform year after year
Engine - Cast iron cylinder sleeve extends life of engine
Perma-lubeoil-less design for maintenance-free operation and quick cold weather starts
Designed for Maintenance-free operation with no belts, belt guards or pulleys, which also means less vulnerability to job site damage
High performance overhead valve design for added power and high efficiency
Includes 1 year limited warranty on parts and accessories High-flo air regulator and push to connect coupler 12 Amp current required, 120 Volts/60 Hertz/ 1 phase 150 PSI tank pressure for longer tool run time 2.5 HP (peak)/1.3 HP (running) 4 gallon, mobile contractor ??pancake?? style tank aircompressor
found in C2550's description:From the Manufacturer
This 2HP (peak), 4 gallon, oil-lube, pancake design. contractor style compressor is packed with features. It also has an cast iron oil-lube pump which is designed for durability and long use. The High-flo air regulator and 2-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site.
4.9CFM @40 and 3.6 CFM @90 Synthetic pump oil for low temp operation Dual air outlets Cast iron pump cylinder for extreme durability 2.5 peak HP 15 amp induction motor
found in CAP2560OL's description: 5 HP oillube pancake compressor
Product Description
mfr: STANLEY BOSTITCH 2. OILLUBE PANCAKE COMPRESSOR Features: Heavy duty induction motor, oil lubricated pump, with synthetic oil included, two outlets included. Air delivery 4.
5.1CFM @40 and 4.0CFM @90 Synthetic pump oil for low temp operation Dual air outlets Cast iron pump cylinder for extreme durability 3 peak HP 15 amp induction motor
found in CWC200ST's description:From the Manufacturer
3HP OilLube Stack Tank Compressor.
Product Description
Portable, electric powered compressor with 3 HP, high output, heavy-duty induction motor. Oillube design.
86 pounds; 2-year limited warranty Includes compressor, mobility kit, ASME safety valve, manual Cast-iron construction 12 amps; 150 psi, enough to operate 2 nailers at once; roll bar to protect motor and pump 2-1/2-horsepower 4-1/2-gallon oiled wheeled single hot dog compressor
found in C3551's description: The oil-lube design is a plus in our book because it'll run quieter and last longer than oil-free models. If you're a contractor looking for the right compressor, you've found it.--Kris Jensen-Van Heste
From the Manufacturer
Why lift when you can roll? The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. A cast iron oil-lube design and 8 oz. oil capacity mean increased durability and a longer lasting machine that wont let you down. The High-flo air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility. This compressor is designed with a removable console for maximum mobility and air pressure.5 HP single tank aircompressor
Oil-lubeaircompressor for maximum durability
150-PSI tank pressure for longer tool run time,
Quieter motor is easy on eardrums
120 V/ 60 hertz/1 phase motor
Two pole, 3450-RPM capacitor start induction motor for maximum air delivery
Includes 1-year limited warranty on parts and accessories
SPECIFICATIONS
150-PSI tank
3450-RPM capacitor start induction motor
8 oz. oil capacity
Product Description
The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. A cast iron oil-lube design and 8 oz. oil capacity mean increased durability and a longer lasting machine that wont let you down. The High-flow air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility.5 gallon, mobile, contractor-style, single tank aircompressor. Patented oil lubrication system allows pump to be operated on an uneven surface and assures long life. 2-port removable console to allow remote air regulation and higher pressure closer to the job site.5 gallon storage capacity air tank supports heavy use of brad nailers, staplers, and finish nailers; moderate use of roofing and framing nailers.5 gallon 150 PSI portable aircompressor, Mobility kit, ASME safety valve, and Operator manual.
found in C3551's reviews: Everything it promises and more.......... - All I can say is there are a LOT of portable aircompressors out there and a lot of them are junk. I did not use the oil that came with compressor though, I decided to run a fully synthetic oil (make sure it is a compressoroil) Ingersoll Rand makes a very high quailty oil for this compressor. Everything is where it should be on this compressor: knobs, gauges,ect. The only thing I would tell someone interested in this compressor is don't be fooled by Porter Cables "oil-free" version of this compressor, I have done a lot of comparision shopping not only is the oilfree version much noiser but you will be servicing it much more often than the oil-lube pump. Lowe's sells the "oil-free" version of this compressor for 299.00!!!!!!!! You can purchase this compressor, tax free and shipped free and it will be shipped right to your front door! What a deal! Good job Amazon!. Outstanding compressor - After using and wearing out several other compressors over the years, I have learned a thing or two about quality. While I use a couple of the DeWalt compressors in my business and am pleased, this PC is my new baby. Don't even think about buying the oilfree version. The oiled units are quieter and have 3-4 times the lifespan of their oilfree brothers. Mine came damaged - It looks like I'm going to go with the Dewalt D55155 instead or the Makita Hotdog since I want an oillubecompressor. Good idea, but a bit more durabilty would be nice - I've been using this compressor for about 2 years of daily remodeling work in Colorado in all weather conditions. I bought it because I was tired of lugging around other compressors that didn't have wheels. The rolling design of this compressor is very good because it can easily go up and down stairs as well as over typical construction site obstacles.
After a year of use the motor kept tripping breakers, so I took the compressor in for service and it received a new compressor and motor.
I work on job sites that have ancient compressors that continue to function flawlessly (but they're really heavy to move around), so I'm a bit worried by the problems I've noticed in only 2 years of use.
Because this compressor is oil lubricated, it does get sluggish in the winter. It also cannot supply as much air as the oil-free version. A trim subcontractor I know has the oil-free version and he has to rebuild his compressor annually with a $40 repair kit, so oilfree isn't entirely without issues. But the oil-free version isn't affected by the cold.
If you already have a compressor you like, I'd bolt some good wheels onto it and weld a nice handle onto the frame. Performs to expectations - I specifically wanted an oillubecompressor for durability, and this model fits that requirement. For handyman work or specialty trim nailing, this compressor is ideal.
60 pounds; 1-year warranty Includes DEWALT synthetic compressoroil and pressure regulator Cylinder constructed of cast iron 4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset 14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in EC12's description: com
Hitachis 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of freeair at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, its the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too.--Kris Jensen-Van Heste
From the Manufacturer
This Hitachi aircompressor is powered by a 2 hp, 115-volt direct-drive motor and oillube pump at 3,450 rpm.1 cfm of freeair, at 90 psi.
From the Manufacturer
The Hitachi EC12 aircompressor is powered by a 2-horsepower, 115-volt direct-drive motor and oillube pump at 3,450 rpm. It delivers 4 cubic feet per minute of freeair at 90 psi.2 cubic feet per minute of freeair
Specifications
Horsepower: 2
Amps: 15
Speed: 3,450 rpm
Air displacement: 8. come with a warranty that guarantees freedom from defects in materials and workmanship for a period of one year from the original purchase date. Oillube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
found in EC12's reviews: CAUTOIN!!!! CHEAP SAID MADE IN CHINDA - Well first when UPS droped off untied the plastic it said on unit MADE IN CHINA, Then when I lifted out of bag I saw pieces of what looked like pot metal in the bottom of bag, What happen was that someone sit it down to hard, busted the motor and compressor from the frame, Metal looked about 1/16" thick,plus free shipping took 13 days to arrive.00 to wait 13 days to get a china made busted compressor.
One-year warranty Provides 8.6 SCFM at 40 PSI and 6.8 SCFM at 90 PSI High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 110 and 135 PSI for more usable air High-pressure technology provides the equivalent of a 32-gallon air supply
found in CPL6025's reviews: WARNING - Amazon's "free" shipping SUCKS! - So, they offer "free shipping", not "free delivery.