60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset 14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in EC12's description: com
Hitachis 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, its the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too.--Kris Jensen-Van Heste
From the Manufacturer
This Hitachi aircompressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It features vertically stacked twin tanks (each with a 2-gallon capacity), line regulator, shutoff valve at line, auto reset, capacitor start, run class F motor, and pressure switch set at 125 psi kick-off, 100 psi kick-on.1 cfm of free air, at 90 psi.
From the Manufacturer
The Hitachi EC12 aircompressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It features vertically stacked twin tanks (each with a 2-gallon capacity), line regulator, shutoff valve at line, auto reset, capacitor start, run-class F motor, and pressure switch set at 125 psi kick-off and 100 psi kick-on. It delivers 4 cubic feet per minute of free air at 90 psi.3-gallon capacity
Comes standard with line regulator and gauges
O-ring on draincock makes valve easy to open and close
Pressure switch has start/stop control at 100 and 125 psi with 14-second recovery time
15 amp motor runs at 3,450 rpm, providing 8.2 cubic feet per minute of free air
Specifications
Horsepower: 2
Amps: 15
Speed: 3,450 rpm
Air displacement: 8. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
Fuel Capacity .66 Gal. Engine Honda GX120 4 HP OHV Gas
Pressure Switch Continuous run unloader valve with idle down - Unloads @135 PSI, Loads @ 115 PSI
Air Delivery 5.4 CFM @ 100 PSI
Air Displacement 12.4 CFM
found in TG-400HST's description:
Longer Life - With the patented LifeGuard™ dirt deflector that keeps job site dust and grit out of the compressor, the new Renegade® will perform year after year
Engine - Cast iron cylinder sleeve extends life of engine
Perma-lube oil-less design for maintenance-free operation and quick cold weather starts
Designed for Maintenance-free operation with no belts, belt guards or pulleys, which also means less vulnerability to job site damage
High performance overhead valve design for added power and high efficiency
20 by 15.6 by 16.5; 71 pounds; 5-year warranty on electrical components Includes manual Durable cast iron 5 cfm at 100 psi; quiet 74 dB; 2-cylinder in-line design 13-1/2 amp, 2-horsepower, 4-gallon, oil-free twin hot dog compressor
found in T-2820ST's description:From the Manufacturer
At (74-decibels) the Thomas T-2820ST is the quietest 2 HP contractor grade compressor on the market. Delivering 5 cfm at 100 psi it is also the highest output 2 HP compressor available. A solid state start switch and 5-Year Electrical Warranty are also Thomas exclusives and not offered anywhere else. Often called "The Cadillac of Portables" it sets the standard on what 2 HP compressors should be.
Max psi 135 Amp draw 14.8 Tank Capacity 4.2 gallon On/Off psi 105/135 HP Peak 3
found in GR2500's description: 2 GAL tank Electric Compressor - GR2500
3 HP 4.2 GAL tank Electric Compressor The Grip-Rite GR2500 offers the professional contractor a compressor that will handle any task.5 horsepower (running) compressor is powerful enough to keep up to three framers or roofers working all day. For lighter finish work, it can supply air for four or more workers. Product Features Supports three framers or roofers working all day Electric, direct drive and splash-lubricated Powerd by Speroni pumps Short pump-up time of approximately 55 seconds Quick, 14 second recovery time Start-up relief valve for easier starting and minimized cold-start amperage draw 3,400 RPM Heavy-duty pressure switch and durable metal guages Limited 12 month warranty Product Specifications HP Peak: 3 On/Off PSI: 105-135 Max PSI: 135 RPM: 3,400 Tank Capacity (gallons): 4.
Full Panel Roll Cage Protection With Recessed, Easy To Read Gauge, Includes ASME Safety Valve. Hi-Flo Air Regulator & Dual Quick-Connect Couplers Delivers 7.7 SCFM @ 40 PSI & 5.3 SCFM @ 90 PSI 2 Pole, 3,450 RPM Induction Motor with Run & Start Capacitors For Easy Start Up & Maximum Air Delivery 1.6 HP Running, 4.3 Gallon, Oil-Free Side Twin Stack Compressor, 150 PSI Maximum Tank Pressure
found in C3101's description:From the Manufacturer
This side-stack aircompressor from Porter-Cable introduces a new high-pressure design that provides 71 percent more usable air over traditional 125 psi units. The pressure switch starts the pump at 120 psi and stops it at 150 psi for more pressure and airflow, so you get better performance from your air-powered tools.
Product Description
Porter Cable,4 Gallon, 3 HP, Oil Free, Sidestack AirCompressor, Provides 150 PSI For Longer Tool Run Time, 5.
Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler and operating manual. Oil-Free Pump - No maintenance or spilled oil, Vertical tank configuration takes less floor space .9 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air" before a 90 PSI tool becomes inoperable 5.4 SCFM for faster tank recharge of 25 gal tank
found in C6110's description:From the Manufacturer
This oil free, space saving vertical, wheeled portable aircompressor from Porter-Cable provides 25 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate + air tool usage of most air tools. High air flow regulator, high flow quick coupler two gages are also included. Reserve air tank is ASME approved.
Full shroud for pump/motor protection, Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler, pneumatic tires and operating manual. Oil-Free Pump - No maintenance or spilled oil, Full pneumatic tires for ease of mobility 1.7 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air"before a 90 PSI tool becomres inoperable 5.7 SCFM for faster tank recharge of 20 gal tank
found in C5101's description:From the Manufacturer
This oil free, horizontal low profile, wheeled portable aircompressor from Porter-Cable provides 20 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate air tool usage of most air tools. High air flow regulator, high flow quick coupler two gages are also included. Reserve air tank is ASME approved.
12-Month limited warranty Electric direct drive and oil splash lubricated for longer life Superior Quality Speroni?® pump Life expectancy of up to 8,000 hours Contractor grade, 3 HP (peak), 4.2 gallon capacity
found in GR2500's description: These same principles are now reflected in Grip-Rite's line of professional quality tools and compressors. This is currently Grip-Rite's flagship compressor for good reason. Other added features include a heavy duty pressure switch and large metal gauges, a start-up relief valve for minimized amperage draw upon cold startup and a moderate 69 decibel noise level. The pontoon-style tank design of this unit was intended to minimize tip over while still offering enough air to handle nearly any job. Compare to: Hitachi EC119, Porter Cable Job-boss Model #C3551, Porter-Cable CPLDC2541S, Porter-Cable CPLDC2540S, Rol-Air The Bull.