Cast iron cylinder enhances pump life Dual soft start valves assists in cold weather start up 4 CFM delivered at 90 psi, provides rapid recovery Easy access panel with two universal couplers improves user access Factory reconditioned to perform like new!
found in D55152R's reviews: DeWalt Compressor - The compressor charges the storage tank to capacity in short order and has no leaks. This is a very nice tool for portable use and light enough to carry around to air up your tires.
Full Panel Roll Cage Protection With Recessed, Easy To Read Gauge, Includes ASME Safety Valve. Hi-Flo Air Regulator & Dual Quick-Connect Couplers Delivers 7.7 SCFM @ 40 PSI & 5.3 SCFM @ 90 PSI 2 Pole, 3,450 RPM Induction Motor with Run & Start Capacitors For Easy Start Up & Maximum Air Delivery 1.6 HP Running, 4.3 Gallon, Oil-Free Side Twin Stack Compressor, 150 PSI Maximum Tank Pressure
found in C3101's description:From the Manufacturer
This side-stack aircompressor from Porter-Cable introduces a new high-pressure design that provides 71 percent more usable air over traditional 125 psi units. The pressure switch starts the pump at 120 psi and stops it at 150 psi for more pressure and airflow, so you get better performance from your air-powered tools.
Product Description
Porter Cable,4 Gallon, 3 HP, Oil Free, Sidestack AirCompressor, Provides 150 PSI For Longer Tool Run Time, 5.3 SCFM For Faster Tank Re-Charge.
Fully enclosed protective belt guard with "Directed" cooling fan. 5 HP Peak motor provides significant air flow. Operates on 120/240 volt service. Pre-wired for 120V. Unique product design from the largest manufacturer of reliable and durable, single stage CAST IRON pumps in the USA 20 Gallon ASME code tank for tough jobs. Rugged Cast Iron two cylinder pump provides up to 5,000 hours of extended life. Oil-Lubricated pump has a traditional design that is quieter and longer lasting.
found in VT6290's description:From the Manufacturer
The VT6290, 2 Running HP, wired for household current delivers enough air power to tackle tough jobs. The 20 gallon horizontal ASME code tank is very portable and will not take up too much valuable real estate in the garage or on the job. The twin cylinder, oil lubricated, cast iron single stage pump runs quieter - so the compressor can be used in the same area that the work is taking place. Solid cast iron units are up to 35% quieter than aluminum units with cast iron cylinder sleeves, and dramatically quieter than direct drive aluminum compressors. These compressors are made in the US with a 3 year warranty.
Product Description
mfr: Campbell Hausfeld Air Products Campbell Hausfeld is a recognized leader in the home improvement and automotive industry.
SINGLE STAGE AIRCOMPRESSOR. Single Stage Cast Iron Compressor5 HP Peak, 20 Gallon.
found in VT6290's reviews: Might work if received undamaged.......and with oil...and a few fixes - The shipping box is flimsy and cannot adequately support nor protect the compressor and parts. Mine arrived with a broken regulator, pressure gauge and air-filter assembly all of which apparently snapped off during shipment with no visible exterior box damage.
As the other reviewer also mentioned the compressor does NOT come with oil so be sure to have SAE30 air-compressor oil ready when it arrives. Also, you will need to provide your choice of air outlet connector.
If it wasn't for the bad shipment packaging I'd say initially that the compressor is a good buy but if Campbell Hausfeld has so little regard to protecting their product in shipment to you I question the integrity of the machine itself.
UPDATE 7/15: I am updating this review a full day after receiving and can add more to the trials and tribulations of purchasing a C-H compressor. The air filter assembly is currently taped but working until I can get a replacment. One leak occurred in the main pipeline to tank (seal was improperly installed), another in the undamaged tank pressure gauge (somone missed adding teflon tape) and the third in the pressure tubing to the cutoff switch (not tightened). All in all if you include travel time to Home Depot nearly 2-1/2 hours were spent just getting the compressor to work only to discover that there is a leak at weld where the pump mount attaches to the tank.) if using an extension cable as this compressor does draw a load when starting.
IMHO I wouldn't order a product like this if you need it for an immediate job as it will take to either repair yourself or to return and await a replacement. I needed this compressor to replace my dead one and ordered it to coincide with my time at home as I could not expect my wife to unload it. VT6290 and FedEx - The box was busted on one side causing some of the content to spill outside (a tire and air filter). On top of that, FedEx delivered the box upside down, causing the discharge tube to bend, the air filter to separate from the pump, a busted pressure gauge and a bent handle bar. The tank takes around 4 minutes to fill up to 135 pounds of pressure. The compressor DOES NOT include oil. The air filter supplied causes the compressor to be kind of noisy.
Except for the awful FedEx delivery, I am happy with the compressor. Free delivery, free air hose, no tax, and 10% off.
12-Month limited warranty Electric direct drive and oil splash lubricated for longer life Superior Quality Speroni?® pump Life expectancy of up to 8,000 hours Contractor grade, 3 HP (peak), 4.2 gallon capacity
found in GR2500's description: These same principles are now reflected in Grip-Rite's line of professional quality tools and compressors. This is currently Grip-Rite's flagship compressor for good reason. The pontoon-style tank design of this unit was intended to minimize tip over while still offering enough air to handle nearly any job.2 gallon tank, 64 lbs total weight, 55 second pump up, 14 second recovery, and 135 max psi, 14. Compare to: Hitachi EC119, Porter Cable Job-boss Model #C3551, Porter-Cable CPLDC2541S, Porter-Cable CPLDC2540S, Rol-Air The Bull.
Convenient control panel design for job site use Reliable job site performance Easy to read gauges and dual quick connects Up to 5000 hours of pump life
found in EX8003's description:
Product Description
mfr: Campbell Hausfeld Air Products Campbell Hausfeld takes performance to the max by launching Maxus, a new brand of heavy-duty powered equipment for contractors and serious do-it-yourselfers.
Premium Gas Powered Compressor - Contractor Model - 5.5 HP Honda Gas, Twin 8 Gallon Wheelbarrow, Cast Iron (Five Year Limited Warranty).
One Year Warranty Convenient control panel has regulator, gauge, and two quick connect outlets Higher tank pressure provides more usable air per tank re-charge New high-pressure design keeps tank pressure between 110 and 135 PSI 3 HP induction motor delivers 7.7 SCFM at 40 PSI, 5.5 SCFM at 90 PSI
found in CPF23400S's reviews: First Impressions... - It only took 3-days for my new compressor to arrive at my doorstep! And best of all, the shipping was free! I immediately unpacked the unit and checked it over. I followed the manufacturer's advice and went through the 15-minute break-in period leaving the tank drain valve open while the motor was running. When I shut the valve after 15-minutes of run time, it only took a few seconds to fill the twintanks to 130 p. Although I haven't used my compressor yet, first impressions are everything. This unit is compact, relatively light weight, fairly quiet, and fills up extremely quick! I can't wait to attach my air nailer and get to work!!!. Great buy - Size of the tank is fine, but its really about the horsepower of the motor and amount of air motor can put out so that you don't have long period of motor running in order to build a pressure in the tank. This 3hp engine is much better than large size tank with 2hp engine. Great for various air tools -
Size of the tank is fine, but its really about the horsepower of the motor and amount of air motor can put out so that you don't have long period of motor running in order to build a pressure in the tank. This 3hp engine is much better than large size tank with 2hp engine. This Portable Compressor is Rugged and Well Built ! - Surprised and impressed! I looked at Home Depot and Lowes and decided to order this aircompressor to save the Tax and the trouble of bring it home. )
Pluged it in, It filled the 4 Gallon tank in 44 Seconds. Thats starting with the tank completely empty.
Looking at the other brands of portable compressors I really like how well this one is built. Great little aircompressor - This aircompressor is great! This unit is fairly quiet, compact, light enough to be toted around if needed, no oil needed and very powerful. This unit replaced a 12 year old 15 gallons, 2 hp, craftsman rolling aircompressor and all I can say is that I wish I purchased this unit sooner. When comparing the 2 units the Porter Cable is definitely stronger, the only difference being that when you are running any tools the compressor is running almost non stop compared to a unit with a larger tank that does not have to refill as fast. I consider this a plus though, because I always drain the tank after each use and it does not take as long to release all the air. At this price range there are many choices out there for anyone looking for a compact aircompressor but when you start to compare CFM ratings @ 90 PSI this one has the highest ratings. Frustrated with the technical assistance - I received my compressor and unpack it. When I turn it on, the tank pressure gauge wasn't working. I went there with the compressor and they took it and said to leave it there for one day, and on the next day they should call me to pick it up. But, after 3 days, they still didn't have changed the little tank pressure gauge, and they said "we are waiting for Porter Cable to send this piece to us, you have to wait until next week". Ohhh! Come on!!! I can't believe that! The most common and cheap part of a compressor they don't have in stock!? Is that kind of technical assistance we have from Porter Cable when we just buy a brand new compressor and need it working??? I think I should send it back and bought another from another company, because, now, I'm just waiting and I can't do my job. Great General Purpose Portable Compressor - I bought this compressor to run nail guns, air sand and spray paint.) The tank pressure gauge is just behind it. This regulates the pressure that reaches the hoses, not the tank pressure. It is also handy to limit the pressure to safe levels for your various air tools. I can easily carry it with one hand from the tank side. It is not as loud as large upright compressors, but it does make a fair amount of noise, although not as much as I expected. I use it with a Souix air sander and it does run longer when I am working. If you take on a tractor trailer, get a bigger compressor. Plenty of Power to Offer...but it needs plenty, too. - I tried the compressor on an undedicated 15 amp circuit, and it immediately blew the switch every time. I also learned (the hard way, of course) that if you are using the compressor with a 50' extension chord (with too high a guage) on a 20 amp circuit, the pump will not get enough electricity to pump air after cutting-in when the tank pressure drops to 110 psi (the specified cut-in pressure) - the pump will start pumping, but quickly stop and you'll hear the motor straining until it blows the 20 amp circuit, too. Porter Cable told me that if I plan to use even a 20 amp circuit with an extension chord, I need to use a 12 (preferable 10) gauge extention chord (ideally 25' rather than 50'), or the pump won't get enough juice to cut-in properly and refill the tanks. It's cheaper, my new Porter Cable friends say, to buy more air hose than the right gauge extention chord - Ah, such knowledge I'm gaining. Sadly, the compressor arrived with an air intake filter housing badly bent downward (done apparently at the factory, as the box from Amazon wasn't damaged), so I couldn't remove the air filter. AND, the drain valve (to drain water from the bottom of the tank) would not completely close allowing lots of air to excape from the tank. In my chats with an Amazon tool sales rep, and later with a Porter Cable tech rep (to help me unravel the compressor's electrical-needs mysteries), both Companies quickly and nicely insisted on sending me a new air intake filter housing and a new drain valve (I guess I'm getting two of each?) - no questions asked. The machine is fairly loud, but it only takes my pump about 6 seconds to refill the tanks from the 110 psi cut-in pressure to the specified 135 psi cut-out pressure. I figure the noise level goes hand-in-hand with the added power this compressor offers - power I think I need. This is a SERIOUS compressor - Desipite its small size and minimal airtank capacity, this is a very serious commercial duty aircompressor. AC induction motors like the ones found in this compressor are far superior to brushed AC motors found in most "consumer" aircompressors. Because of this motor, the compressor is able to deliver air flows similar to larger 15 gallon compressors. Quite frankly, I'm amazed that anyone can sell this compressor for such a low cost. Aside from air sanding or heavy duty HVLP paint spraying, there is nothing that I cannot do with this compressor. Darn Good Little Compressor - Short and sweet - this compressor delivers on its promises - it is easy to use, easy to break-in, easy to maintain, and you can't beat the duel air hose inlets. I have found both of the built in pressure gauges to be accurate, and the oil-free motor is quieter than other compressors I have used (although it still makes a good bit of noise). To me, that's portable - I can understand how that would not be the case with everyone, but my experience leads me to believe that this compressor has a very good weight-to-horsepower-to-air storage capacity ratio. Also, this thing is built like a tank - strong welds, a great 'roll-cage' and tough rubber feet. Excellent compressor - quietest I've used in its category - I am never able to live without a good aircompressor. I use them for a variety of tasks from simple blowing to nailers and air hammers. As smaller aircompressors go, this one really delivers a nice, steady pressure for quite a long time.
Normally I like to blow through my air gun at about 50psi to clear sawdust. Blowing air at that pressure really drains a small compressor fast, but this one really handles it well and gives me quite a bit of extra time due to the fact that the motor really kicks in quickly and efficiently to keep the pressure up. In fact, from empty it only takes about a minute to fill the tank, which is nice.
I couldn't outpace the compressor with a single nailer.
The two air ports is really nice in one this size because I can put the compressor underneath my workbench and mount a static line on my workbench for easy access anytime while leaving the other open for longer hoses. These size compressors can make an INCREDIBLE amount of noise, but the Porter-Cable 3hp 4 gallon side stack really keeps the noise level at a minimum.
Fuel Capacity .66 Gal. Engine Honda GX120 4 HP OHV Gas
Pressure Switch Continuous run unloader valve with idle down - Unloads @135 PSI, Loads @ 115 PSI
Air Delivery 5.4 CFM @ 100 PSI
Air Displacement 12.4 CFM
found in TG-400HST's description:
Longer Life - With the patented LifeGuard™ dirt deflector that keeps job site dust and grit out of the compressor, the new Renegade® will perform year after year
Engine - Cast iron cylinder sleeve extends life of engine
Perma-lube oil-less design for maintenance-free operation and quick cold weather starts
Designed for Maintenance-free operation with no belts, belt guards or pulleys, which also means less vulnerability to job site damage
High performance overhead valve design for added power and high efficiency
.
found in TG-400HST's reviews: Air Cube 1 - This compressor is a contractor's dream.4 CFM @ 100 PSI air delivery. This 1-1/2 foot cube gas compressor fits in the trunk of a midsize vehicle. This is the only gas power compressor that I have worked with that a single average size person can move (alone).
The 4 HP Honda engine is efficient and can operate a workday on one tank of gas. The engine optimizes fuel efficiency by automatically slowing to an ideal speed when the airtanks are full.
The engine, even while operating faster to fill the airtanks, is relatively quiet allowing a normal conversation a few feet away. It is quieter than the pancake compressors I have used.
Each airtank has a separate moisture drain valve to keep the tanks from rusting on the inside.
* The air regulator comes with two 1/4" female NPT thread connections. Since I could not remove the stripped hex plug, I used the air gage connection to add a tee.
Low oil shut off provides greater engine protection 8 HP Honda OHV GX gas engine provides proven reliability and durability Low profile design for easy maneuverability Quad cylinder, cast iron, oil lubricated pump 16.2 cfm delivered @ 100 psi for high volume applications
found in D55271's description: 2 cubic feet per minute @ 100 psi, while the low-profile design of the compressor means less operator fatigue and maximum job site maneuverability. The compressor includes a 3/8-inch regulator and an initial fill of DeWalt synthetic aircompressor oil.2 cubic feet per minute delivered at 100 psi for high-volume applications
Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability
Low-profile design for easy maneuverability
8-horsepower Honda OHV GX gas engine provides proven reliability and durability
Automatic idle control for reduced fuel consumption
Pneumatic tire improves worksite mobility
Ball valve drain allows for quick and thorough tank draining
Specifications
Drive: belt drive
Horsepower: 8 hp
Tank size: 8 gallons
Power supply: Honda gas OHV GX engine
Cubic feet per minute at 100 psi: 16.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
Accessories are included for convenient use right out of the box. Compressor offers automatic shut-off feature. Bonus nailer kit is included with a 2 in 1 1-1/4" brad nailer and 1-1/4" stapler. The sturdy handle allows for comfortable handling and simple storage. 1 Gallon tank offers additional stored air capacity. Tank eliminates pulsations caused by piston action.
found in FP202899AV's reviews: handy for small jobs - The small one gallon tank is great for small jobs around the house and is pretty light to carry. Dont Buy this!!! - Still this thing didnt help me @ all, in fact it managed to drain any available air i had in my tire out. Problems:: 1) Never built up enough pressure in tha tank to inflate tires 2) Couldnt even maintain airpressure, airpressure dropped dramatically when attempting to fill tires. 3) It actually aided in draining remaining air out of tires. 4) My car is really screwed now, since i only have 17lbs of air in 1 tire.
0 Extra-flexible 3' hose with universal locking adapter Pressure-tested tank holds compressed air for months Great for inflating car, truck and bike tires, sporting equipment and other recreational equipment in remote areas where a power source is not available
found in KT1100's description: 11 Gallon Air Carry Tank.
Product Description Airtight tank holds compressed air for months Models include: Air shut-off gage.
found in KT1100's reviews: Works as advertised - I've had one of these Campbell Hausfeld tanks for many years, to carry compressed air outside to work on lawn equipment.
Pros:
- For low air-volume applications, or when you need decent pressure for a short while, it works just fine. It's purpose is to have compressed air on a small job (or tire-filling), where there is no electricity.
Cons:
- After filling the tank (125 psi to 175 psi, depending on your aircompressor), pressure will quickly drop below 80 psi once you start using it. So, this tank is only practical for air tool use of very short duration - e., an air ratchet wrench to remove a handful of bolts/nuts. Air tools just don't work [well] with insufficient pressure. In fact, with 11 gallons of pressurized air, this tank is only useful for small air-volume applications, regardless of pressure needed. Of course, the tank can be refilled as needed, but that gets tiresome.
With no electricity nearby, options include: this tank, a long extension cord, or a long air hose. Otherwise, any aircompressor would be a better choice, since air volume at pressure, will be unlimited. (Of course, the cheapest tankaircompressors cost around $100.