52 pounds; 1-year warranty Includes brad nailer, finish nailer, compressor, vinyl air hose, pipe joint tape Heavy-duty steel construction Comes with 16-gauge finish nailer, 18-gauge brad nailer, and 6-gallon, 10 amp, oil-free pancake compressor Factory-reconditioned finish nailer and compressor combo kit
found in CFFN250NR's description: You can finish any woodworking project with this limited edition kit that includes both a finish nailer, brad nailer, and compressor. Ideal for on-site trim work, architectural woodwork, and casework installation, this finish nailer and compressor kit from Porter-Cable is perfect for the finish trim installer. Includes: 1 Porter-Cable 16 gauge, 3/4"�2-1/2" finish nailer kit (FN250B), 1 Porter-Cable 18 gauge, 5/8" �1-1/4" braid nailer kit (BN125A), 1 135 psi, 2hp, 6 gallon pancake style compressor, 1 300 psi, 25' vinyl air hose, 1 air hose fitting, 1/4" male plus coupler, Pipe joint tape.
found in CFFN250NR's reviews: PorterCableCompressor - I used the compressor to install an oak hardwood floor. Quality control issue - I just received a reconditioned PorterCable combo and was very disappointed. The regulator was clearly defective it blew air through the housing.
Full Panel Roll Cage Protection With Recessed, Easy To Read Gauge, Includes ASME Safety Valve. Hi-Flo Air Regulator & Dual Quick-Connect Couplers Delivers 7.7 SCFM @ 40 PSI & 5.3 SCFM @ 90 PSI 2 Pole, 3,450 RPM Induction Motor with Run & Start Capacitors For Easy Start Up & Maximum Air Delivery 1.6 HP Running, 4.3 Gallon, Oil-Free Side Twin Stack Compressor, 150 PSI Maximum Tank Pressure
found in C3101's description:From the Manufacturer
This side-stack aircompressor from Porter-Cable introduces a new high-pressure design that provides 71 percent more usable air over traditional 125 psi units. The pressure switch starts the pump at 120 psi and stops it at 150 psi for more pressure and airflow, so you get better performance from your air-powered tools.
Product Description PorterCable,4 Gallon, 3 HP, Oil Free, Sidestack AirCompressor, Provides 150 PSI For Longer Tool Run Time, 5.
12-Month limited warranty Electric direct drive and oil splash lubricated for longer life Contractor grade, heavy duty pump with cast-iron cylinder Industrial grade motor with ball bearings provides greater durability 4.3 gallon capacity twin tanks, 2.5 HP (peak)
found in GR254CTS's description: These same principles are now built into Grip-Rite's line of professional quality tools and compressors. Make no mistake, this compact but rugged compressor will keep the busiest roofing and framing crews going all day, job after job. The design of this unit was intended to minimize the footprint while still offering enough air to handle almost any job. Compare to: Hitachi EC119, PorterCable Job-boss Model #C3551, Porter-Cable CPLDC2541S, Porter-Cable CPLDC2540S, Rol-Air The Bull.
12-Month limited warranty Electric direct drive and oil splash lubricated for longer life Superior Quality Speroni?® pump Life expectancy of up to 8,000 hours Contractor grade, 3 HP (peak), 4.2 gallon capacity
found in GR2500's description: These same principles are now reflected in Grip-Rite's line of professional quality tools and compressors. This is currently Grip-Rite's flagship compressor for good reason. The pontoon-style tank design of this unit was intended to minimize tip over while still offering enough air to handle nearly any job. Compare to: Hitachi EC119, PorterCable Job-boss Model #C3551, Porter-Cable CPLDC2541S, Porter-Cable CPLDC2540S, Rol-Air The Bull.
1-year limited warranty Oil-lubricated for cool running and longer life Wheelbarrow design with pneumatic tire for portability Gas-powered for use on remote job sites High-pressure design allows almost twice as much usable air
One year warranty/30 day performance certification 8.3 scfm at 40 psi, 6.1 scfm at 90 psi Two gallon tanks provide four gallons of air supply Oil-free design-no spillage or work contamination 15 amp, 2 hp induction motor starts and runs on household current
found in CF2400's reviews: Porter-Cable CF2400 - Excellent compressor overall with more than ample air flow and capacity to power any pneumatic framing nailer, finish nailer or medium crown stapler. This oilfree unit is manufactured by DeVilbiss for Porter-Cable.
One Year Warranty Supports use of all brad and finish nailers and moderate use of framing and roofing nailers High-flow regulator allows more work at higher pressures 3 hp induction motor for quieter operation High-pressure technology provides more usable air for longer run time
found in CPF23400P's reviews: Great Little Air Squeezer!!! - This little PorterCablecompressor is all (and more) that I expected it to be. The output should be more than adequate for my needs to run an air ratchet, blow nozzle, hand sandblaster and pressurize a small auxilliary portable tank. A better choice for that kind of a work environment would be the 3HP enclosed, stacked-tank model offered by PorterCable. Maybe a good compressor, but beware of shipping - I ordered my P-C 3HP/4GAL compressor from Amazon, and their tool supplier, Tool Crib, shipped the unit to me via UPS. When I unpacked the compressor there was a broken piece of plastic in the bottom of the box.
I took the compressor to the local Porter-Cable service center and they tell me the boxes the P-C compressors come in are NOT designed to handle the rigorous treatment of UPS shipping. The compressor is very heavy and the support inside the box is just flimsy cardboard, so the unit will shift alot during UPS shipment.
Be advised about this shipping problem with this compressor. Tool Crib should know better than to ship these heavy units in flimsy boxes! Luckily the local Porter-Cable service center is willing to fix it under warranty!. Good Quality, Great Service - There are a lot of pancake compressors on the market, but this one stands out for two reasons. Second, the PorterCable service organization. If you're *anywhere* near a medium sized or larger city, spare parts and repair are just a phone call away.
For the remodeler working alone, or the handman looking for a small compressor for the shop, this machine is an excellent chice. Badly designed pressure switch - The pressure switch occasionally will not shut of the compressor. I called PorterCable to send me a new one and they wouldn't. I phoned the service center and they said they may not have the parts for this compressor and may have to order them.
One-year warranty Provides 8.6 SCFM at 40 PSI and 6.8 SCFM at 90 PSI High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 110 and 135 PSI for more usable air High-pressure technology provides the equivalent of a 32-gallon air supply
One-year warranty Provides 8.3 SCFM at 40 PSI and 5.8 SCFM at 90 PSI High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 110 and 135 PSI for more usable air High-pressure technology provides the equivalent of a 32-gallon air supply
found in CPF6025VP's reviews: Last PorterCable Tool I Purchase - It is still under the warranty so I phoned PorterCable. So, I ended up driving to the nearest town today to buy a new compressor of a different brand. What do I expect you might ask? I expect them to let me take the brand new thing to any near by place that can fix it and have the bill sent to them! I have purchased a lot of PorterCable tools while building this house but that compressor was the last one!. Some problems, poor service policy, impressive specs -
Be warned, the PorterCable service policy as stated in the manual is essentially: Don't return a defective unit to the retailer. Call PorterCable to find the nearest service center. You pay the shipping(not cheap on a 130 pound compressor).