20 by 15.6 by 16.5; 71 pounds; 5-year warranty on electrical components Includes manual Durable cast iron 5 cfm at 100 psi; quiet 74 dB; 2-cylinder in-line design 13-1/2 amp, 2-horsepower, 4-gallon, oil-free twin hot dog compressor
found in T-2820ST's description:From the Manufacturer
At (74-decibels) the Thomas T-2820ST is the quietest 2 HP contractor grade compressor on the market. Delivering 5 cfm at 100 psi it is also the highest output 2 HP compressor available. A solid state start switch and 5-Year Electrical Warranty are also Thomas exclusives and not offered anywhere else. Like all Thomas machines it is rated for continuous use. Often called "The Cadillac of Portables" it sets the standard on what 2 HP compressors should be.
found in T-2820ST's reviews: The Cadillac of portable aircompressors - My new Thomascompressor, T-2820ST, is quiet enough to run in the house and is so well balanced that it is not too heavy to move around. extension cords can be used); this is the Cadillac of portable compressors. The paint job on the tanks could be better and air fittings could be included, but those are minor issues.
Long life, contractor quality machine - rated for continuous use Low amp draw - works on 15 amp circuits and with extension cords Versatile - offers framing, roofing or finish gun capability 3/4 Horsepower - delivers 1.7 cfm at 100 psi. Lightweight and portable, only 26 pounds
found in T-635HD's description:From the Manufacturer Thomas Industries T-635HD is a quiet running (69-decibel) 3/4 HP compressor that is both portable and versatile. Other uses include, tire inflating, painting, airbrushing, small air tools, and winterizing water lines and RV's.
found in T-635HD's reviews: kinda load - Thomas has good tech support - Received as expected, actually a day early thanks Amazon, the compressor is very well packed for shipping.5 hours, it will not hold air. I'm now trying to get a reply from Thomas on where to take it or send it back for repair,I would like to resolve this as the compresser is a great size for one gun use. Thomas Tech did return my call - worked with me on phone to try & fix problem, he overnighted the replacement part and upon installation everything is up & running - good tec support, this has caused it to quiet a little. Compressors/Thomas T-635HD - Light weight, dependable; and quiet! This is what I was looking for in a compressor.and this is why I specifically went looking for ThomasCompressors.
I worked on a top notch remodeling company restoring historical houses, and a carpenter used one on everything from framing, to trim work, rain or shine Thomas kept up.Since then I have been waiting for my Emglo to get retired so I too can be a proud owner of a Thomas T-635HD
One thing that I did not like when my Thomas T-635HD arrived was a real lack of directions to assemble the few parts that did need to be put on before operation, but anyone with common knowlege of compressors will figure it out.
This compressor is not intended for HIGH-PRODUCTION ie. if you are in the market for a compressor that is small,light;and dependabley quiet. Your search has ended here !
Don't get fooled by tool packs that come with nail gun, air-hose and compressor in one deal you will be looking for a new compressor soon. Reliable - From what I'm told, it's hard to wear these out, and if you do, Thomas has the parts to do an easy rebuild. Light weight professional grade compressor for small jobs - I was looking for a portable and not overly loud aircompressor, for my low air-volume tools. I had a 4-gallon pancake compressor for several years, but at 70 lbs. The Thomas 3/4 HP model, at 26 pounds, is so lightweight that I can comfortably pick it up with TWO fingers. Although it hardly qualifies as "quiet", it isn't nearly as noisy as other compressors I've heard. I installed a 16" stainless steel braided faucet plumbing hose on the compressor's air-outlet port; routed the hose out the back under the motor support, and screwed on a quick disconnect coupling. Because the tank is only 2 gallons (to keep weight/bulk down), the pump comes on more often than on larger units, but when it does, it's only on for about 12 seconds (if you're not using air).
Thomas's Perma-Lube pump design results in a 100% duty cycle. Translation: the compressor can be used continuously, without letup. Some compressors have only a 50% duty cycle, which means you shouldn't run it more than 30 minutes for every hour used, as that could cause excessive wear on the pump and/or motor.
You'd want a bigger unit if you had two roofing or stud-nailers going, but for low-air-volume requirements such as trim work, this little Thomas unit is just about perfect.
September 2006 update:
While working on a home renovation project, the compressor's low air pressure switch clicked, but the motor didn't start. By the time I got to the compressor, the motor was smoking, literally. In any case, the little Thomas had sat there for a few minutes just humming; and overheated.
All-steel/aluminum construction (no plastic shrouds) for optimal durability Life-Guard Dirt Deflector for cleaner, cooler operations Quiet-running (75 decibels) for reduced operator fatigue 3.1 cfm @ 100 psi output for supporting up to two nailers simultaneously 1,700 rpm motor keeps up with the fastest nailers
found in T-100SP's description:From the Manufacturer
Designed for continuous, multiple-gun operation, the Thomas Model T-100SP Renegade is a high output, 1-horsepower compressor tough enough for a wide variety of applications.1 cfm at 100 psi, this three-gallon pancake tank compressor supports one to two nail guns simultaneously. High overall tank pressure (135 psi) supports longer hose runs, which means greater air-storage capacity, too. The patented "Life Guard Dirt Deflector" extends compressor life by eliminating dirt and improving cylinder cooling. A slow-turning (1700 rpm) motor reduces noise level and extends compressor life.
FEATURES
Only 75 decibels for less operator fatigue
Higher CFM Delivery - 135 psi
Designed to Run on 15 Amp Circuits
Designed to Run on Extension Cords
All Steel/Aluminum Construction (No Plastic Shrouds)
Built for Contractors in Sheboygan, Wisconsin
Rated for Continuous Use (100% Duty Cycle)
Ball Bearing Construction Throughout
Will Start and Run in Cold Weather
Extremely Well Balanced (no walking)
Run at Any Angle (will not run tight)
Fast, Easy, Low Cost Rebuilds
No Maintenance Costs or Downtime
No Oil to Add, Change or Spill
Life - Guard Dirt Deflector Extends Life
SPECIFICATIONS
Air Displacement 6.0 CFM
Air Delivery 3.1 CFM @100 PSI
Max pressure to 135 PSI
Pressure Switch Starts compressor @ 110 PSI
Stops compressor @ 135 PSI
Motor 1 HP electric motor
Capacitor Start
Tanks Capacity 3 gallons
Shipping Weight 57 lbs.
found in T-100SP's reviews: thomas brand - I own the twin tank 4 gallon renegade model compressor(replacing much loved rolaircompressor). Anyone considering this compressor should not hesitate if specs match needs. I think that the 15 pounds or so lighter the T-100SP is than mine would make for a pretty desirable compressor.
Contractor quality machine - rated for continuous use. Lightweight and portable - only 26 lbs. Low 4 amp draw - will operate anywhere Will operate any (1) finish gun or brad nailer The quietest finish/trim compressor on the market
found in T-617HDN's description:From the Manufacturer
The super quiet (60 decibel) T-617HDN is the hands down favorite for those that want a quiet running, long life compressor capable of handling any (1) finish gun or brad nailer. Additional uses include, airbrushing, inflating tires, air mattresses, sports equipment, and winterizing RV's and motor homes.
found in T-617HDN's reviews: When Quality & Quiet Matter More Than Price & Power - I researched compressors carefully around town and on the Web. Compressors available at the Borg and various local tool shops are gawdawful loud, heavy, and look to be made of cheap plastic and pot metal. The compressor will be carried around and used indoors.
The 1/2 HP Thomas seems to be right for me. The unit is light enough to carry around easily, and its shape rides comfortably beside your walking legs (unlike pancake compressors).
The compressor only puts out about 1 CFM and has a 2 gallon tank.
You will not be happy with this compressor unless your needs and preferences are similar to mine. It really doesn't put out or hold much air. No durability experience since I haven't had the compressor for long.
Fuel Capacity .66 Gal. Engine Honda GX120 4 HP OHV Gas
Pressure Switch Continuous run unloader valve with idle down - Unloads @135 PSI, Loads @ 115 PSI
Air Delivery 5.4 CFM @ 100 PSI
Air Displacement 12.4 CFM
found in TG-400HST's description:
Longer Life - With the patented LifeGuard™ dirt deflector that keeps job site dust and grit out of the compressor, the new Renegade® will perform year after year
Engine - Cast iron cylinder sleeve extends life of engine
Perma-lube oil-less design for maintenance-free operation and quick cold weather starts
Designed for Maintenance-free operation with no belts, belt guards or pulleys, which also means less vulnerability to job site damage
High performance overhead valve design for added power and high efficiency
Long life, contractor quality, rated for continuous use. Low 10 amp draw - works on cords.
Quiet running - use indoors or out
Lightweight and portable, only 43 lbs
1 HP - 2.5 cfm @ 100 psi
found in T-35HD's reviews: Quality compressor - I bought this model a few months back, and it is a great little compressor. I had some questions and was able to get thru to a Thomas service rep. Thomas has models that are smaller/lighter than this one, but I needed the ability to run two nailers at a time.
Honda 5.5 HP GX160 Engine with low oil shut down Automatic idle down control Direct-drive design - no adjustments Lightweight - only 96 lbs. 12 cfm at 100 psi - 8 HP performance, 5.5 HP price
found in TG-550H's description:From the Manufacturer
The TG-550H is the worlds first 2 cylinder direct-drive compressor. The compressor is bolted directly to the engine flange which results in a lightweight, compact machine that out-performs anything in its class.) and with air delivery of 12. The compressor never needs adjustment and air delivery remains contant, there is no loss of performance due to belt stretching or slippage.
12 Month limited warranty Easy turn drain valves on each tank Rugged roll cage design and recessed gauges mean jobsite durability Compact Sturdy size and Lightweight at only 37lbs! 2hp (peak) Oil-free Pump with 2 gallon Air Tank Capacity
found in GR152CM's description:From the Manufacturer
This stout little compressor is Grip-Rite's #1 selling compressor for good reason. If you do finish work, punch out work, or just need an easily transportable compressor to use in your garage, the Grip-Rite GR152CM will exceed your expectations. Compare with Bostitch CAP2560OL, Porter-Cable CPFAC2600P, ThomasCompressors T-617HDN.